10x10 Square EPDM Foam Rubber Gasket is a square-section sealing and cushioning profile with a nominal cross-section of 10 mm x 10 mm. REP lists the product under model RXV 10x10, with a 10 mm width and 10 mm height.
The square profile provides a practical contact surface for sealing, cushioning, vibration reduction and gap filling applications. Depending on the installation design, it can be used in equipment enclosures, electrical cabinets, machinery, metal structures, technical doors and other industrial assemblies.
For customized orders, REP Vietnam can review technical drawings, physical samples, installation gaps, required lengths, fixing methods and production quantities before recommending the appropriate manufacturing solution
A 10x10 square EPDM foam gasket is an elastic rubber profile with a square cross-section measuring approximately 10 mm by 10 mm.
Unlike a flat sheet gasket, a square profile provides a defined cross-section that can be positioned inside a gap or between two mating surfaces.
When compressed, the foam profile can deform and create contact against the surrounding surfaces. This makes it useful for applications where a flexible sealing or cushioning layer is required.
For industrial purchasing, however, the nominal 10x10 size should not be treated as the installation gap automatically.
The actual installation condition should be reviewed based on:
Gap width and depth.
Compression requirement.
Contact surfaces.
Operating temperature.
Moisture exposure.
Vibration.
Fixing method.
Required length and quantity.
Key Benefits of a Square EPDM Foam Profile
Balanced square cross-section
The 10x10 cross-section provides a compact and symmetrical profile.
This can be convenient for applications where the available installation space has a relatively uniform geometry.
For applications requiring a different rectangular geometry, REP also offers profiles such as the 10x30 EPDM foam gasket. REP 10x30 EPDM foam gasket
Elastic cushioning
Foam rubber profiles can deform under compression and work as a flexible interface between rigid components.
This is particularly useful when the assembly needs to accommodate small surface irregularities or reduce direct contact between components.
Sealing support
When properly designed and compressed, an EPDM foam gasket can help limit the passage of dust, moisture and air through a joint.
Actual sealing performance depends on the profile, material formulation, compression ratio and installation design.
Vibration and impact reduction
The elastic structure can also provide cushioning between contacting components.
For machinery and industrial enclosures, this may help reduce direct transmission of vibration or prevent hard contact between surfaces.
Typical Applications
Electrical cabinets and equipment enclosures
A 10x10 foam profile can be used as a cushioning or sealing layer around doors, covers and enclosure joints.
Typical objectives include:
Reducing dust ingress.
Limiting moisture penetration.
Providing a flexible contact layer.
Reducing direct impact.
Supporting enclosure sealing.
Industrial machinery
The profile may be installed around machine covers, access panels, protective structures and other joints requiring an elastic interface.
For applications involving significant vibration or continuous mechanical loading, the actual operating conditions should be reviewed before selecting the final material and profile.
Technical doors and structures
Square foam profiles can also be used in certain doors, panels and technical structures where a simple elastic profile is preferred.
When the gasket needs to wrap around an edge, a U-shaped profile may be more suitable. REP's U-shaped EPDM foam profile is an example of a profile designed around an edge rather than as a simple square cross-section.
Choosing Between 10x10 and Other Foam Profiles
Profile geometry should always be matched to the installation condition.
A square 10x10 profile is relatively symmetrical. A rectangular profile provides different dimensions in the horizontal and vertical directions, which may be useful where installation space is uneven.
REP also supplies larger rectangular foam profiles, such as the 15x30 foam rubber gasket, for applications requiring a larger cross-section. 15x30 rectangular foam rubber gasket
For smaller installation spaces, a 6x6 square EPDM foam profile may be considered. 6x6 square EPDM foam gasket
Therefore, the correct selection should be based on the complete assembly rather than simply choosing the largest or smallest available profile.
Custom EPDM Foam Gasket Manufacturing
For industrial customers, the required gasket may not always be available as an off-the-shelf profile.
REP can discuss customized production based on:
Technical drawings.
Physical samples.
Cross-sectional dimensions.
Required lengths.
Installation geometry.
Production quantity.
Application conditions.
REP also manufactures other EPDM foam profiles, including E-shaped and B-shaped profiles for applications requiring more specialized cross-sections. Custom E and B-shaped EPDM foam gaskets
This allows customers to compare a simple 10x10 square profile with more specialized profiles before finalizing the design.
What Information Should Buyers Provide?
For a quotation, buyers should ideally provide the following information.
Product specification
State the required profile as:
10x10 square EPDM foam gasket
If 10x10 refers to the free cross-section, this should be clearly stated.
Installation gap
Provide the actual:
Gap width.
Gap depth.
Available installation space.
Required compression.
Contact surface dimensions.
Operating environment
Where possible, specify:
Indoor or outdoor use.
Water or moisture exposure.
Temperature conditions.
Vibration.
Chemical exposure.
Mechanical loading.
Order quantity
Specify:
Total length.
Individual cut lengths.
Number of pieces.
Estimated annual consumption.
This information helps the supplier determine the most appropriate production and packaging method.
Why the Installation Gap Matters
A common mistake when ordering rubber profiles is assuming that the profile dimension and installation gap should always be identical.
A 10x10 gasket has a nominal cross-section of 10 mm by 10 mm, but the required gap can vary depending on whether the gasket is intended to:
Fill a void.
Be compressed between two surfaces.
Sit inside a groove.
Provide cushioning.
Reduce vibration.
Prevent direct contact.
For this reason, a technical drawing or physical sample is strongly recommended for production orders where dimensional accuracy is important.
EPDM Foam Gasket Solutions from REP
REP's product range includes square, rectangular and shaped EPDM foam profiles.
For example, the 34x20x4 EPDM foam gasket is another profile designed for applications involving sealing, cushioning, vibration reduction and related industrial requirements. 34x20x4 EPDM foam gasket
REP also provides a broader range of EPDM foam products for customers who need to compare different cross-sectional geometries. Browse REP EPDM foam gasket products
For edge-mounted applications, shaped profiles such as the L-shaped EPDM foam gasket can provide a different installation approach from a simple square profile. L-shaped EPDM foam gasket
Ordering Process
Step 1 – Send the requirement
Provide the product name and required quantity:
10x10 Square EPDM Foam Gasket
Step 2 – Provide a drawing or sample
A cross-sectional drawing or physical sample is especially useful for replacement projects.
Step 3 – Confirm technical requirements
REP can review:
Profile dimensions.
Material.
Installation conditions.
Required length.
Quantity.
Manufacturing requirements.
Step 4 – Quotation
Once the technical information is confirmed, REP can provide a quotation based on the required specification and quantity.
Step 5 – Production
After approval, the gasket can be prepared according to the agreed production requirements.
Frequently Asked Questions
Is the REP 10x10 gasket actually 10x10mm?
REP lists the square gasket as 10 mm wide and 10 mm high.
For precision applications, the final dimensions should still be confirmed against the technical drawing or approved sample.
Does 10x10 mean the installation gap must be 10mm?
No. The 10x10 dimension describes the gasket cross-section. The required installation gap depends on the design and compression requirement.
Can a 10x10 EPDM foam gasket reduce vibration?
It can be used as an elastic cushioning layer in suitable applications. Actual vibration performance depends on the material, compression, load and system design.
Can REP manufacture customized profiles?
Yes. REP provides various foam rubber profiles and can discuss production based on drawings, samples and specific requirements.
What if 10x10 is not suitable?
Customers can compare other square, rectangular or shaped profiles depending on the installation geometry and sealing objective.
The 10x10 Square EPDM Foam Gasket is a compact square-section rubber profile suitable for sealing support, cushioning, gap filling and vibration-related applications.
Its symmetrical cross-section makes it practical for assemblies where a simple square profile is preferred. However, selecting the right gasket should involve more than the nominal 10x10 dimension.
The installation gap, compression requirement, operating environment, fixing method, required length and quantity should all be considered before production.
For replacement parts or industrial projects, customers are encouraged to provide a technical drawing or physical sample so REP Vietnam can review the profile and recommend the appropriate manufacturing solution.
