Search Criteria
Search
Provider: Ron silicon chữ E
White E-profile silicone gasket 11x11x2 is a molded silicone sealing profile with an E-shaped cross-section. The profile geometry is intended for assemblies where the gasket needs to interact with several contact areas within a specifically designed structure.The supplied 11x11x2 specification shoul..
Provider: Ron cao su xốp vuông
The 15x15mm Square EPDM Foam Rubber Gasket is an elastic foam rubber profile with a square cross-section. It can be considered for applications requiring cushioning, dust protection, reduced direct contact and sealing support.The 15x15mm dimension describes the required cross-section and should not ..
Provider: Ron silicon chữ U
8x10x2 white U-profile silicone gasket is a molded silicone sealing profile featuring a U-shaped cross-section.The U-shaped geometry can be considered for assemblies where the profile needs to fit around an edge, sit inside a groove, or interact with a specifically designed installation structure.Th..
Provider: Ron silicon chữ U
The 8x21x4 white U-profile silicone gasket is a molded silicone profile featuring a U-shaped cross-section.Unlike round seals, flat silicone strips or other molded profiles, a U-profile contains a base section and two side sections that form a characteristic channel.This geometry can be considered f..
Provider: Ron cao su xốp
A D8 Foam Rubber Seal is a round-profile foam rubber seal identified by a nominal diameter specification of 8 mm.Depending on the selected material and product structure, foam rubber seals may be used for:
Gap filling.
Cushioning.
Supporting sealing applications.
Reducing direct co..
Provider: Ron cao su phi tròn
An EPDM Rubber Seal D1 is a small round-profile rubber component with a nominal diameter of approximately 1mm.It may be considered for applications requiring a compact rubber element for gap filling, cushioning, positioning or sealing support between mating surfaces.For such a small profile, however..
Provider: Ron cao su chữ U
The EPDM Rubber U-Channel Seal 4x23x1 with a 2mm gap is a custom-profile rubber product with a U-shaped cross-section. It may be used in applications where a rubber profile needs to fit around an edge, rim, or component with compatible installation dimensions.
The specification 4x23x1 with a 2mm ga..
Provider: Ron cao su xốp chữ nhật
The 5x15 rectangular EPDM foam gasket is an elastic foam rubber profile designed for applications requiring cushioning, gap filling, surface protection and supporting sealing between mating components.The rectangular cross-section has two different dimensions, making installation orientation an impo..
Provider: Ron silicon chữ T
A T-shaped silicone gasket is a technical silicone rubber sealing profile designed with a T-shaped cross-section. The profile can be installed into a groove or retaining structure, while the upper section provides an elastic contact surface for sealing.This design is useful for industrial equipment,..
Provider: Ron cao su chữ U
The 5x12x1.5mm White EPDM U-Shaped Gasket is a formed rubber profile designed for applications where the gasket needs to grip an edge, provide cushioning and support sealing.The U-shaped cross-section allows the profile to sit around a suitable edge or panel. When correctly matched to the installati..
Provider: Ron silicon chữ D
A D-profile silicone gasket has a rounded sealing section that can deform elastically when compressed against a mating surface.Compared with a round silicone cord, a D-profile can provide a more directional contact surface. This can be useful where the installation structure requires a specific cont..
Provider: Ron silicon chữ U
The White Silicone Rubber U-Channel Seal 26x16x2.5 with a 21mm gap is a custom-profile silicone rubber gasket with a U-shaped cross-section. It is identified by its dimensional specification and is intended for installation positions compatible with the actual profile design.The specification 26x16x..